A cool feature for the bathroom is the magazine rack. It’s an accessory that adds a stylish touch tothe space in addition to being practical. So how would a bathroom magazine rack look like? Theoptions are numerous and a lot of them are DIY projects which offer the flexibility and freedom ofcustomizing the rack according to the exact measurements of the available space and the stylepreferred for the décor.

A sleek and stylish system for hanging magazines on a wall is featured on Monsterscircus. Eachmagazine needs a thin strip of wood with two small knobs at the ends in order to stay like that.They are each hung from a wall-mounted nail, screw or hook using a piece of cord or twine. Tomake this whole system you need some wood, knobs, a saw, a drill, leather cord and scissors.

Another system that’s just as simple if not even easier to use is described on Burkatron. The leathermagazine holders featured here are very easy to make using leather straps, a hammer and somenails and a hole punch. First you fold a leather strip in two and make sure it can hold a magazinecomfortably. Cut it to size and then punch holes at the ends. Secure it to the wall with a nail.

Wall-mounted magazine racks are very practical mostly because they don’t occupy any floor spacewhich is limited in bathrooms. That’s why there are many easy-to-craft types and systems such asthe one on Themerrythought. To make this magazine rack, for example, you only need some coppertubing, a hoop, something to cut the tubing with, string and a hot glue gun. You can give yourmagazine rack as many tiers as you want.

The magazine hanger featured on Designsponge also has three tiers but is made a bit differently. Thematerials required for this project include canvas fabric, a wooden dowel, rope, scissors, a needleand thread or a sewing machine, clay base plates, glue and velcro fixers. The whole process isdescribed thoroughly and the project is actually quite simple.

A casual and stylish magazine rack design that would suit a bathroom well is featured on Mydubio.To make something similar for yourself, you’ll need some wooden blocks which you can buy orcraft, a drill, some spray paint and rope. Drill a hole in the center of each block and make sure it’swide enough to run the rope through. Spray paint the blocks and then insert the rope through thehole and tie a knot. You can hang two magazines this way and they’ll balance each other.

Magazine racks with pockets and always practical and useful in a lot of different settings. You caneasily make your own version by following the steps described on Themerrythought. You’ll needa few thing including canvas drop cloth or other type of fabric, scissors, straight pins, a sewingmachine, leather and d-rings. Cut the canvas, fold it and iron it and make three pockets which willbe attached to a back section. Pin them in place and then sew them on. Sew the leather pieces tothe top and bottom and add the rings.

Of course, the wall-mounted magazine racks aren’t the only suitable option. If the space in yourbathroom allows it, a freestanding rack could be strategically placed and used as an accessory. Thiswooden design is easy to build using two pieces of wood that form an X-shape. A ruler, a saw anda pencil are also required. Check out the full article to find out all the details.

A basket can work perfectly as a magazine holder and there are lots of types of baskets to choosefrom and lots of ways in which you can decorate and personalize them. For example, you can wrapsisal rope around it to give it a rustic look. Learn all about the transformation on Dwellbeautiful.You can roll the magazines and store them all in the basket.

How about a stylish magazine rack with a bit of industrial flair? It could be coordinated with amatching bathroom sink or other features. The rack can be made using copper pipes. Otherrequired materials include elbow connectors, glue, a sewing machine, lacquer and a pair of oldjeans for the pocket that holds the magazines.{found on pillarboxblue}.

A similar design is also described on Manmadediy but this time the magazine rack is made usingwooden dowels and slats. Wood screws, a large piece of fabric and a sewing machine are alsoneeded. The wooden frame is really easy to put together and once the fabric pocket is added theproject is pretty much complete. Of course, you can paint the frame if you want to customize itslook. Also, choose a type of fabric that cheers up or complements your bathroom décor.